Novo Ford vozilo hitne pomoći
Chang Sha Shi
Ako odlučite kupiti opremu po niskoj cijeni, provjerite da li vi komunicirate sa stvarnim prodavateljem. Saznajte što više informacija o vlasniku opreme. Jedan od načina prijevare je da se predstave kao prava tvrtka. U slučaju sumnje, obavijestite nas o tome radi dodatne kontrole, putem obrasca za povratne informacije.
Prije nego što odlučite izvršiti kupnju, pažljivo pregledajte nekoliko prodajnih ponuda kako biste razumjeli prosječnu vrijednosti odabranog modela opreme. Ako je cijena ponude koju vam se sviđa mnogo niža od sličnih ponuda, razmislite o tome. Značajna razlika u cijeni može ukazivati na skrivene nedostatke ili pokušaj prodavača da počini prijevaru.
Nemojte kupovati proizvode čija je cijena previše različita od prosječne cijene slične opreme.
Nemojte davati suglasnost na sumnjive zaloge i plaćanje robe unaprijed. U slučaju sumnje, nemojte se bojati pojasniti pojedinosti, zatražiti dodatne fotografije i dokumente za opremu, provjerite autentičnost dokumenata i postavljajte pitanja.
Najčešći tip prijevare. Nepošteni prodavatelji mogu zatražiti određeni iznos predujma kako bi "zarezervirali" vaše pravo na kupnju opreme. Dakle, prevaranti mogu prikupiti veliki iznos i nestati, i više se ne pojavljivati.
- Prijenos pretplate na karticu
- Nemojte plaćati unaprijed bez izdavanja dokumenata koji potvrđuju postupak prijenosa novca, ako vam je tijekom komuniciranja prodavatelj postao sumljiv.
- Prijenos na račun "povjerenika"
- Takav zahtjev treba biti alarmantan, najvjerojatnije komunicirate s prevarantom.
- Prijenos na račun tvrtke s sličnim imenom
- Budite oprezni, prevaranti se mogu prikriti iza poznatih tvrtki, neznatno mijenjajući njihov naziv. Nemojte prenositi sredstva ako vam je naziv tvrtke sumnjiv.
- Zamjena vlastitih podataka u fakturi stvarne tvrtke
- Prije prijenosa, provjerite jesu li navedeni detaljie ispravni i odnose li se na navedenu tvrtku.
1.050 kg
Broj mjesta
6-8
Kina, Chang Sha Shi
1.100 kg
Broj mjesta
5-8
Kina, Chang Sha Shi
1.100 kg
Broj mjesta
5-8
Kina, Chang Sha Shi
1.500 kg
Broj mjesta
2
Kina, Suizhou
2.350 kg
Broj mjesta
6-8
Kina, Chang Sha Shi
1.000 kg
Broj mjesta
5-8
Kina, Chang Sha Shi
5-8
Kina, Chang Sha Shi
8.000 kg
Broj mjesta
3
Kina, Suizhou
2.000 kg
Broj mjesta
5
Kina, Suizhou
Turska, ANKARA/KAHRAMANKAZAN
Turska, ANKARA/KAHRAMANKAZAN
4
Ujedinjeni Arapski Emirati, Ajman
1.500 kg
Turska, Ankara
4.100 kg
Broj mjesta
6
Turska, ANKARA/KAHRAMANKAZAN
1.500 kg
Broj mjesta
3+3
Turska
5
Turska
3 ASIENTOS EN CABINA
Španjolska, Herencia
Francuska, Saint-Nicolas-de-Port
5
Hrvatska, Buzet
5
Hrvatska, Buzet
Anwenhao T8 Ambulance is a pure electric ambulance manufactured by Hunan Tianyu Automobile Manufacturing Co., Ltd. The following is its main configuration information:
Basic Parameters
Overall Dimensions: Length 5998mm, width 2068mm. Multiple height options are available, among which the medium-roof height may be 2720mm or 2780mm.
Wheelbase: 3750mm.
Power: 155kW.
Gross Vehicle Mass: 4850kg.
Rated Passenger Capacity: 5-9 persons (including stretcher).
Maximum Speed: 120km/h.
Chassis Configuration
The vehicle body is made of Shanghai Baosteel cold-rolled steel, with high-strength steel accounting for 65%. Key parts adopt 68 pieces of aircraft-grade boron steel. The chassis is built based on the "Qingtian Architecture", providing multiple wheelbase and roof height options, with a maximum modification space of up to 15.4m³.
Safety Configuration
It is equipped with L2.5-level ADAS driving assistance system, integrating 17 intelligent functions; dual-motor EPB/Autohold automatic parking system; domestically leading ESP system (Version 9.3), covering 25 sub-functions.
Medical Cabin Configuration
Warning System: Standard long-row LED blue warning lights at the front of the vehicle, including a warning light and siren controller, a hand-held control handle with a intercom function, LED flashing lights at the rear of the vehicle, and blue or red reflective films and emergency signs pasted around the vehicle body.
Medical Cabin Interior: Partition wall assembly with sliding window, medical anti-slip, acid and alkali resistant, wear-resistant PVC floor. The top and left side walls are integrally formed environmentally friendly interior panels, with pre-embedded steel plates inside the left side wall.
Medical Equipment Cabinets: Including medicine cabinets, storage cabinets, hanging cabinets, oxygen cylinder cabinets, equipment cabinets, emergency box cabinets, etc.
Oxygen Supply System: 2 sets each of 10L oxygen cylinders, oxygen cylinder fixing brackets, double-gauge pressure reducing valves, high-pressure resistant medical-grade oxygen hoses, oxygen terminal interfaces, and humidifiers.
Stretcher and Seat System: Domestic automatic boarding stretchers and stretcher rails, doctor seats and family seats with safety belts and leather covers.
Infusion System: 2 sets of fixed foldable infusion hangers or slide-rail type infusion hangers.
Lighting System: 4 sets of on-board 12V/LED lighting lamps, 1 door-opening lamp, 2 infusion spotlights, and external field lighting lamps.
Disinfection System: 1 set of on-board 12V ultraviolet disinfection lamp.
Intercom System: Hands-free intercoms installed in the driving cabin and medical cabin.
Electronic Control System: ACC key ignition control, integrated main engine fuse box in the driving cabin, integrated control panel in the medical cabin, on-board 12V/1000W pure sine wave inverter, and 2 sets each of AC:220V/DC:12V uninterruptible power sockets.
Safety System: 1 set each of on-board 1KG fire extinguisher, safety hammer, safety handrail, and stainless steel waste bucket in the medical cabin, and anti-collision soft packs in the medical cabin.
Air Conditioning and Ventilation System: Original air conditioning and heating in the medical cabin, sliding glass for the middle door, and electric ventilator.