Nova Ceylan 3 AXLE CONCRETE MIXER TRAILER poluprikolica sa niskom platformom

TRAILER TECHNICAL SPECIFICATIONS :

TRAILER MAIN CHASSIS SIZE :
Total Length: 7.500 mm (+/-)
Width: 1.400 mm (+/-)

TRAILER MAIN CHASSIS :
It is manufactured from high strength steel with “I” cross-section from side by side gas-original welding machines. Thickness of the main chain lower and top lamps will be 15 mm , width 120 mm

TRAILER CHASSIS BODY :
Manufactured by 8 mm steel

AXLES :
3 Axles Trax ,Osman Koç or Brand on stock
1st axle liftable (in front).
2nd & 3rd axles are fixed;
Air suspension, Drum Brake System

TIRES AND RIMS :
6 Units 385 65 R 22,5 Brand on stock
6 Units Steel Rims

BRAKE EQUIPMENT:
71/320/ewg ff brake system according to EC standards.
Wabco, Knorr or Brand on stock. ABS-EBS brake system
Automatic slacks, 4 spring brake chambers and 2 service brake chambers.
RSS that provides safe driving system against 2S / 2M EBS

LEGS:
Two speed, telescopic, mechanical conveyor legs, Dynamic : 25 tons , Static :50 tons

KING PIN:
Steel king-pin which is 2” according to DIN 74080 standards and 3½” 42 CRMO4 according to DIN 74083 standards are used.

ELECTRICAL EQUIPMENT:
Complying with SAE standards and TÜV regulations
Electricity is provided by 7 pin plug from vehicle
There are necessary traffic advisory and stoplights on both sides
There are back lights, brake lights, license plate lamps, trailer reflectors and warning lights on the sides.
ACCESSORIES:
Caution signs
Reflectors
Tool box
Water tank
Bicycle barrier
Spare wheel Carrier
Extinguisher Box

-------------------------------------------------------------
MIXER DRUM TECHNICAL SPECIFICATION :

THICKNESS AND MATERIAL QUALITY OF DRUM SHEET:
Drum Chamber is made from 6 mm thick, Outlet 5 mm and Inlet Helixs are made from 4 mm thick EREĞLİ 9435 quality steel material

DRUM PULLEY SYSTEM :
Single roller is 280 mm indiameter GGG 60 special sphero casting and in touch with the ring at 2 points and have wavering systems

DRUM TURNING SPEED : 0-15 Rot/Min. Has Handle control and fixed turning rate

DRUM ROTATION COMMAND SYSTEM: Mechanical controlled (left & Right) and has a speed control

WATER TANK: It is made from 3 mm thick S235 JR quality steel material with a capacity of 800 liters.

WATER PUMP : There are “1 ½” Inlet and Outlet and operates by a gearbox.

COOLING SYSTEM : By Hydraulic cooler

HYDRAULIC HOSE : Hydraulic pressured and made by Manuli /Italy

P.T.O SYSTEM : Operated by truck PTO system

GEARBOX : TRANSMITAL 580 L

HYDRAULIC PUMP TYPE : HYDROSILA 110 cc

HYDRAULIC MOTOR TYPE : HYDROSILA 90 cc

OIL COOLER : 24 Volt CHR Oil Cooler

MIXER CHASSIS : Chassis is made by using S235 JR Quality NPU profilr as 10 mm thick outer (160X70X70 mm) part and 10 mm thick inner (140X70X70 mm ) part which total 20 mm in thickness

FRONT & BEHIND CONSOLES : Front & Behind consoles are made from 6-7 mm thick S235 JR quality material

BOLTS : Bolts are 8.8 quality

TRUCK FENDER : Lightened and high corrosion resistant plastic (Imported)

EXTENSION CHUTE : Filler, “V” type and turning chutes are made from 3 mm thick s235 JR quality material . Extension chute is in front of turning chute with size of 70 cm . There are 2 pcs additional plastics chutes.

CHUTE LIFTING JACK : It is hydraulic system and Imported

PAINTING
2 coats of epoxy primer, 2 coats of acrylic paint.
Color : RAL Code to be specified by customer